Porous PTFE Fabric which is Breathable
PTFE fiberglass/Kevlar fabric is made from high intensity fiberglass yarn by plain weaving, satin weaving or cross grain, coated with fine quality PTFE Teflon
Features of PTFE high temperature fiberglass fabric:
1. Dimensional stability, high strength, lengthening coefficient is less than 5%;
2. High temperature resistance, continuous operating temperature is -70-260 , can resist up to320 in a short time
3. Skin friction coefficient is low, good insulating property;
4. Resistance to bond, easy to clean all kinds of oil stain, dirty spot or other attached in the surface;
5. Excellent resistance of all kind of strong acidic or alkaline corrosion, no burning, endurable to aging.
Porous Teflon Coated Glass
|This glass cloth has been coated with Teflon form a porous non- bondable fabric that can be used to control the resin content of a laminate during the bagging operation. It is applied directly over the uncured, epoxy impregnated glass, and then covered with a breather mat that will absorb the excess resin. The amount of resin removed is contingent upon the number of layers of bleeder felt used.
Non-porous Teflon Certified Glass
Porous Teflon Fiberglass Fabric
Similar material to Peel Ply, but Teflon coated for easier release. Best for flat or simple curved parts. Width 38″, brown in color.
Designed for manufacturers who strive for optimal performance and efficiency in processes, KFLON PTFE coated fabrics products offer the longest-lasting and most consistent performance under trying conditions
PTFE Porous Teflon Release Fabric/Wind Turbine Mould Release Liner & linings
What is it?
Wind turbine mould release liner & linings are part of a range offered from made from PTFE coated fabrics. These materials can be used to allow the easy release of the mould sections once cured.
How are Wind Turbines made?
There are usually two methods used for the process of manufacturing wind turbine blades which is either infusion composite or prepreg which you can take a look at by following the hyper links.
How does your PTFE coated glass fabric come in to use?
The two methods referred to would generally use PTFE coated glass fabric to line moulds providing easy release once the process is finished. The benefit would be the smooth surface on the blade due to the highly concise structure of the PTFE sheet materials surface.
How does your PTFE fabric hold in position?
Our materials are supplied with a high performance silicone adhesive that will hold in the elevated temperatures involved when curing the blades in an autoclave. The maximum temperature we would recommend for our adhesive would be not to exceed 250 Celsius or 480 Fahrenheit.
How can we buy this?
You can contact us either by e mail at email@example.com firstname.lastname@example.org or by calling our CN based Technical Sales Team on 0086-15850895828